Double shaft cover
Double shaft cover
We focus on quality, innovation and customised solutions.
Double shaft cover for multiple ducts through one shaft...
For multiple ducting of flue gas pipes made of rigid plastic (PPs)
With the Skoberne double shaft cover for rigid flue gas systems, we offer you the perfect solution for the chimney head for renovation projects and also for new builds (UNIFIX LA90). The double shaft cover is currently available in the nominal widths 60/60, 80/80 and 60/80. The double shaft cover has a height of 160 mm and a base area or support surface of 390 x 390 mm.
The nominal widths 60/110 and 80/110 are available on request.
There is no need for the sometimes time-consuming installation of chimney covers on site. The chimney head can be closed or covered immediately with the Skoberne double chimney cover.
Planning and installation note!
The installation must ensure the independence of the individual flue gas pipes. The respective longitudinal mobility must be ensured. The distance between the outer walls of the flue gas pipe and the inside of the shaft must be 20 mm. At least 30 mm for round shaft cross-sections. The distance between the flue gas pipes must be at least 15 mm. The geometry of the spacer provides the minimum distance. The flue gas pipes must be offset in height (at least 2 x socket thickness). The spacers must be installed at staggered heights approx. every 2 metres.
Note!
Coordination should take place with the responsible chimney sweep prior to planning and installation.
Advantages and properties
- Available in nominal widths 60/60, 80/80 and 60/80
- One shaft cover for 2 flue gas pipes
- High-quality stainless steel cover
- Can be used flexibly
- Quick and easy installation for 2 flue gas pipes
- Ideal solution for CHP units in conjunction with a condensing boiler
- UV-resistant