Single dwelling installations - rigid / flex
Plastic flue pipes
We focus on quality, innovation and customised solutions.
Product advantages of plastic flue pipes at a glance:
- Longevity
- Resistance to acidic condensates
- Low sensitivity to the thermal shock of the condensing boiler
- Simple assembly thanks to easy push fit connections
We have the right plastic flue gas pipe for all nationally and internationally recognised operating modes:
- single-walled rigid
- Single-walled flexible
- Concentric (flue gas supply air system)
Depending on the situation and requirements, these can be easily combined and/or supplemented. This means that all non-standard building situations can be mastered.
The following sketch shows an example of typical installation methods:
Product features and areas of application for Skoberne plastic flue pipes:
- Made of PP plastic (polypropylene).
- For oil and gas fireplaces (flue gas temperature up to 120 °C).
- For oil and gas fireplaces with heat exchanger (flue gas temperature up to 120 °C).
- For combined heat and power units up to 5000 Pa delivery pressure (flue gas temperature up to 120 °C)
- as well as gas heat pumps and fuel cells.
- UV resistance: stabilised[JY1] [AL2] [JY3]
- Fire protection "flame retardant" (formerly DIN 4102 B1)
Dimensions:
- single-walled rigid: 60 - 250
- single-walled flexible: 60 - 110
- Concentric: 60/100, 80/125, 110/150, 110/160
All systems are tested for pressure test classes (P1 / H1) and approved in accordance with DIN EN 14471.
On the left you can see a selection of different operating modes in which gas appliances with Skoberne flue gas pipes can be operated. They differ primarily in terms of the flue gas routing and the supply of combustion air.
SKOBERNEEinwandige
|
SINGLE-WALLED - RIGID
System description:
- Certification: DOP No. 91376-V03
- For oil and gas fireplaces
- Material: PP (polypropylene)
- Temperature class: T120 (up to 120 °C)
- Pressure class: P1=200 Pa / H1=5000 Pa
- Single-walled rigid
- Room air-dependent (open vent)
SINGLE-WALLED - FLEXIBLE
System description:
- Single-walled Flex system flue gas system made of plastic (PP)
- Certification: DOP No. 91376-V03
- For oil and gas fireplaces
- Material: PP (polypropylene)
- Temperature class: T120 (up to 120 °C)
- Pressure class: P1=200 Pa / H1=5000 Pa
- Single-walled flex
- Room air-dependent / room air-independent* (Room Sealed)
Further information is available for download: